Friday, Sept. 10, 2021 My new garage has been completed, and getting it setup and arranged has been cutting into my ham radio time. Due to the height of the new garage, there’s no practical […]
Friday, Aug. 27, 2021 My station remains off the air while the dipole that serves Studio C is laying on the ground. I go to the shack each evening and monitor my Georgia CW traffic […]
Thursay, Aug. 12, 2021 Since I took my Ten-Tec radios offline, I’m depending on my Tempo 2020 transceiver for my ham radio work from Studio C. I recently bought a new iambic key on eBay. […]
Friday, July 30, 2021 Tonight I decided its time to move things around in Studio C — time to remove the Omni V.9 with a eye at putting one of my Heathkit SB-102s in place. […]
Sunday, July 18, 2021 After doing some research, I found that the VCO issue on the Ten-Tec Paragon is pretty common, and is usually fixed by reflowing solder joints. The affected VCO is the under […]
Thursday, July 15, 2021 This evening I went to the shack and decided to switch back from the Ten-Tec Omni V and put the Paragon back in line. I was surprised when I turned the […]
Friday, July 9, 2021 I have my Drake TR-7 unearthed (meaning that I’ve taken the Vibroplex Lightning Bug, the Cedar Rapids bug, and the Bunnell Gold Bug off the top of the radio), and have […]
Wednesday, July 7, 2021 Time to do a little catch-up here on the Zedman’s blog. FIELD DAY. Due to a busy day away from the shack, I didn’t spend much time working Field Day. I […]
I dove into my Hallicrafters R-46 speaker refurbishing project today. I had to collect equipment and materials in order for me to get the project started. Believe it or not, but 35 years ago, I […]
My latest ham radio project is refinishing a very rough Hallicrafters R-46 speaker. The case is in good physical condition, but the finish is pretty awful. The speaker’s grill “cloth” isn’t really cloth, but a […]
Copyright © 2024 | MH Magazine WordPress Theme by MH Themes